Category: Environmental

With the release of the Eagle 2 gas monitor, Control Equipment is now more than ever ready to assist in the detection of low level VOC’s. Whilst the Eagle is a fully portable instrument able to detect for up to six independent gases, we also have many other instruments available for permanent solutions to environmental concerns.

airflow

AIRFLOW Model

AIRFLOW offers a rugged, non-contact solution for the universal requirement to monitor air velocity and direction in any tunnel application.  AIRFLOW is a low cost, low maintenance solution that is ideally suited to tunnel environments.  A modern design, using the latest technology and components, housed in a stainless-steel enclosure – this instrument is closest yet to a “fit and forget” airflow monitor.

Continue reading “Direction Model for Tunnels” »

C2300sm

C2300

The heavy duty electrochemical sensor is a diffusion style head that is ideally suited to meet a wide variety of Toxic gas detection needs. The C2300 can be wired into any controller as well as into any existing BMS or PLC system.

Continue reading “Range Toxic Gas Sensor” »

Eagle2

Eagle 2 Model

The Eagle 2 is the newest member of the Control Equipment family.  Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection.  One of the new features of the EAGLE 2 is a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases.

Continue reading “One to Six Gas Portable Monitor” »

GX-2009sm

GX-2009 Model

The GX-2009 picks up where the GX-2001 left off. Among the many advancements are dual audible alarm ports and alarm LEDs on 3 sides of the instrument. This allows alarm conditions to be visible from multiple perspectives, especially in high noise environments. Continue reading “Four Gas Personal Monitor” »

O2 Sensor sm

R65-2504RK-C

Ideally suited for Laboratory environments, the Oxygen Sensor has been designed to be used in conjunction with a Beacon Controller.  Matched with a  Siren and Strobe the O2 system can be used as a stand alone system or integrated into a full BMS System.

Continue reading “Oxygen Sensor” »

SC-01

SC-01 Model – Single Toxic Gas Monitor

With smart interchangable sensors the SC-01 automatically recognises any sensor change without any set up or configuration changes.  This allows the sensor’s calibration information to stay with each sensor, allowing calibration to be carried out away from the instrument.

Continue reading “SC-01” »

SD-805sm

SD-805 Series

With a visual display the Model SD-805 series smart transmitter/detector heads are state of the art instruments housed in a flameproof enclosure. Calibration of the instrument is able to be carried out with a simple magnetic control key by placing it over clear marked positions on the surface plate.  It is ideal for Intrinsically Safe Applications.

Continue reading “Smart Transmitter / Infrared Gas Detector” »

VCom

V-Com Model

With low cost of ownership and minimal maintenance required the VCOM is a robust unit that satisfies the common requirement for a single sensor solution for monitoring both Carbon Monoxide and visibility in road tunnels.

Continue reading “Visibility Monitor for Tunnels” »

Vipa

Vipa Model

VIPA provides a dependable solution to the requirement for stand alone visibility monitoring in the tunnel environment.  The instrument consists of a transmitter head  and receiver head mounted 6m apart on the tunnel wall or ceiling.

Continue reading “Visibility Monitor for Tunnels” »

GX-2012

GX-2012 Model

The GX-2012 is the newest state-of-the-art Gas Detector in the Control Equipment arsenal and our smallest personal 5 sensor gas monitor with a built-in sample pump.  Specially designed for the LNG / Pipeline industry in Australia, the GX-2012 fills the need for a monitor with the dual capabilities of two operating modes: Normal (for confined space) and Bar Hole. Continue reading “Multi Gas Detector” »

OI-6000 thumbnail

OI-6000 Wireless Gas Sensor Assembly

The OI-6000 Sensor Assembly is an innovative wireless gas detection system designed to monitor gas in hostile environments without the use of wires or conduit from the controller to the sensor. Continue reading “OI-6000” »

SP-220_smallest

SP-220 SC Series

The SP-220 SC Series is a Portable Gas Leak Checker designed to easily check for Super Toxic, Combustible and Freon Gas leaks. With 12 hours operation on 2 AA size Alkaline batteries and weighing in at only 215 grams this instrument is ideal for Super Toxic, Combustible and Freon Gas Leaks.

Continue reading “Portable SC Gas Leak Checker” »

Contact Control Equipment

Submit an email enquiry or give us a call on 1 800 174 536 and we will answer any questions that you may have.

International Partners

National Phone 1 800 174 536
Control Equipment Pty Ltd
ABN 23 009 838 582

Advertising Agencies Brisbane