Category: Manufacturing

The Manufacturing industry has many diverse requirements for gas detection. With over 100 sensors available for toxic gases alone we have the largest range available for all applications. Best of all, our sensors are made by Riken Keiki under strict quality control. Each sensor is tested prior to release as opposed to batch testing, providing peace of mind with each sensor.

Beacon-410

Beacon 410

The Beacon 410 is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitor. It simultaneously displays the gas type, readings, and status for 4 channels of gas detection.  A digital Modbus interface for remote logging of data via a Modbus network comes standard.

Continue reading “4 Channel Wall Mount Gas Detection Controller” »

C2300sm

C2300

The heavy duty electrochemical sensor is a diffusion style head that is ideally suited to meet a wide variety of Toxic gas detection needs. The C2300 can be wired into any controller as well as into any existing BMS or PLC system.

Continue reading “Range Toxic Gas Sensor” »

Eagle2

Eagle 2 Model

The Eagle 2 is the newest member of the Control Equipment family.  Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection.  One of the new features of the EAGLE 2 is a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases.

Continue reading “One to Six Gas Portable Monitor” »

GD-70D

GD-70D Model

The new Model GD-70D smart gas detection transmitter series sets a new standard for performance, flexibility, and versatility. The long life high capacity pump and wide variety of sensing elements are replaceable in a few seconds, with no tools required. The smart sensors retain all calibration and sensor-specific data in non-volatile memory, so sensors can be hot-swapped in the field with no programming required.

Continue reading “Intelligent Gas Detector” »

GX-2009sm

GX-2009 Model

The GX-2009 picks up where the GX-2001 left off. Among the many advancements are dual audible alarm ports and alarm LEDs on 3 sides of the instrument. This allows alarm conditions to be visible from multiple perspectives, especially in high noise environments. Continue reading “Four Gas Personal Monitor” »

O2 Sensor sm

R65-2504RK-C

Ideally suited for Laboratory environments, the Oxygen Sensor has been designed to be used in conjunction with a Beacon Controller.  Matched with a  Siren and Strobe the O2 system can be used as a stand alone system or integrated into a full BMS System.

Continue reading “Oxygen Sensor” »

RI-85

RI-85 Model

The compact portable light weight Carbon Dioxide instrument has been designed with a Infrared (NDIR) sensor for fast and reliable detection.

Continue reading “Portable Infrared CO2 Gas Monitor” »

SC-01

SC-01 Model – Single Toxic Gas Monitor

With smart interchangable sensors the SC-01 automatically recognises any sensor change without any set up or configuration changes.  This allows the sensor’s calibration information to stay with each sensor, allowing calibration to be carried out away from the instrument.

Continue reading “SC-01” »

SD-805sm

SD-805 Series

With a visual display the Model SD-805 series smart transmitter/detector heads are state of the art instruments housed in a flameproof enclosure. Calibration of the instrument is able to be carried out with a simple magnetic control key by placing it over clear marked positions on the surface plate.  It is ideal for Intrinsically Safe Applications.

Continue reading “Smart Transmitter / Infrared Gas Detector” »

SP-220_smallest

SP-220 SC Series

The SP-220 SC Series is a Portable Gas Leak Checker designed to easily check for Super Toxic, Combustible and Freon Gas leaks. With 12 hours operation on 2 AA size Alkaline batteries and weighing in at only 215 grams this instrument is ideal for Super Toxic, Combustible and Freon Gas Leaks.

Continue reading “Portable SC Gas Leak Checker” »

Contact Control Equipment

Submit an email enquiry or give us a call on 1 800 174 536 and we will answer any questions that you may have.

International Partners

National Phone 1 800 174 536
Control Equipment Pty Ltd
ABN 23 009 838 582

Advertising Agencies Brisbane