Category: Oil and Gas

From personal protection for individuals through to entire asset protection for offshore oil rigs, Control Equipment has the equipment for all solutions no matter the environment. With our Head Office located in Brisbane, Qld we are ideally located to work closely within the coal seam gas industry.

alma2

ALMA G2 System

ALMA G2 (Airborne Laser Methane Assessment Generation 2) is the solution for effective and economic pipeline and storage network monitoring and inspection. The ALMA G2 is a cutting edge laser based natural gas detection system that performs inspections at ground level while airborne. Continue reading “Airborne Laser Methane Assessment” »

Beacon-410

Beacon 410

The Beacon 410 is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitor. It simultaneously displays the gas type, readings, and status for 4 channels of gas detection.  A digital Modbus interface for remote logging of data via a Modbus network comes standard.

Continue reading “4 Channel Wall Mount Gas Detection Controller” »

C2300sm

C2300

The heavy duty electrochemical sensor is a diffusion style head that is ideally suited to meet a wide variety of Toxic gas detection needs. The C2300 can be wired into any controller as well as into any existing BMS or PLC system.

Continue reading “Range Toxic Gas Sensor” »

Eagle2

Eagle 2 Model

The Eagle 2 is the newest member of the Control Equipment family.  Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection.  One of the new features of the EAGLE 2 is a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases.

Continue reading “One to Six Gas Portable Monitor” »

GD-70D

GD-70D Model

The new Model GD-70D smart gas detection transmitter series sets a new standard for performance, flexibility, and versatility. The long life high capacity pump and wide variety of sensing elements are replaceable in a few seconds, with no tools required. The smart sensors retain all calibration and sensor-specific data in non-volatile memory, so sensors can be hot-swapped in the field with no programming required.

Continue reading “Intelligent Gas Detector” »

GX-2009sm

GX-2009 Model

The GX-2009 picks up where the GX-2001 left off. Among the many advancements are dual audible alarm ports and alarm LEDs on 3 sides of the instrument. This allows alarm conditions to be visible from multiple perspectives, especially in high noise environments. Continue reading “Four Gas Personal Monitor” »

methane-mini

Laser Methane Mini

The new Laser Methane mini (LMm) is capable of remotely detecting methane and other gases containing methane (natural gas or similar). It can quickly detect gas leaks or accumulated gas from a remote place by pointing a laser beam at the target, and is even able to detect a leak through glass.

Continue reading “Compact & Portable Methane Gas Detector” »

SC-01

SC-01 Model – Single Toxic Gas Monitor

With smart interchangable sensors the SC-01 automatically recognises any sensor change without any set up or configuration changes.  This allows the sensor’s calibration information to stay with each sensor, allowing calibration to be carried out away from the instrument.

Continue reading “SC-01” »

SD-805sm

SD-805 Series

With a visual display the Model SD-805 series smart transmitter/detector heads are state of the art instruments housed in a flameproof enclosure. Calibration of the instrument is able to be carried out with a simple magnetic control key by placing it over clear marked positions on the surface plate.  It is ideal for Intrinsically Safe Applications.

Continue reading “Smart Transmitter / Infrared Gas Detector” »

selma sm

SELMA System

When attached to a vehicle, Selma is designed to detect methane gas leaks while still keeping up with traffic.  Utilising infrared detection the unit is able to detect small gas leaks rising from main pipes located under the road surface.

Continue reading “Street Evaluating Laser Methane Assessment” »

Combustible-Sensor

R61-0203-02RK

The Combustible Gas Sensor type R61-0203-02RK, for diffusion sensing, is a highly reliable catalytic style sensor which is designed to give extended service even under extreme conditions.  Arguably the most robust catalytic Combustible sensor on the market, this sensor will typically last 3-7 years.

Continue reading “Combustible Sensor” »

SC-8000

SC-8000 Portable Toxic Gas Monitor

With its large LCD display the readings on the SC-8000 are visible even if the operator is wearing a Hazmat suit.  For loud environments the unit is equipped with a 95dB alarm together with three bright LED lamps, making alarm conditions both audible and visible in any situation.  The unit is also designed to be waterproof, thus making the SC-8000 extremely rugged in any setting. Continue reading “SC-8000” »

GX-2012

GX-2012 Model

The GX-2012 is the newest state-of-the-art Gas Detector in the Control Equipment arsenal and our smallest personal 5 sensor gas monitor with a built-in sample pump.  Specially designed for the LNG / Pipeline industry in Australia, the GX-2012 fills the need for a monitor with the dual capabilities of two operating modes: Normal (for confined space) and Bar Hole. Continue reading “Multi Gas Detector” »

OI-6000 thumbnail

OI-6000 Wireless Gas Sensor Assembly

The OI-6000 Sensor Assembly is an innovative wireless gas detection system designed to monitor gas in hostile environments without the use of wires or conduit from the controller to the sensor. Continue reading “OI-6000” »

SP-220_smallest

SP-220 SC Series

The SP-220 SC Series is a Portable Gas Leak Checker designed to easily check for Super Toxic, Combustible and Freon Gas leaks. With 12 hours operation on 2 AA size Alkaline batteries and weighing in at only 215 grams this instrument is ideal for Super Toxic, Combustible and Freon Gas Leaks.

Continue reading “Portable SC Gas Leak Checker” »

GP-1000_e02

GP-1000

Portable single gas detector for combustibles with attractive features including: direct reading of 25 target gases, datalogging, pump boost, ingress proof rating IP67, Intrinsically safe with ATEX approval for Hazardous Areas. Ideal for checking gas leaks or monitoring the presence of gas in hazardous areas typically found in oil refineries and petrochemical plants.

Continue reading “Combustible Gas Detector” »

Contact Control Equipment

Submit an email enquiry or give us a call on 1 800 174 536 and we will answer any questions that you may have.

International Partners

National Phone 1 800 174 536
Control Equipment Pty Ltd
ABN 23 009 838 582

Advertising Agencies Brisbane