Category: Specialty Instruments

Control Equipment has a range of instruments available for specialty applications. These include the AC-2 and AC-3 models from Riken Keiki, which have been developed for the measurement and analysis of Photoelectron Spectroscopy in Air.

We also have instruments in our range for Very Early Warning aspirating smoke detection, which buy the critical time needed to investigate an alarm and initiate an appropriate response to prevent injury, property damage or business disruption. These systems also can be equipped with modules to detect hazardous/combustible gases to extend their value beyond smoke detection to include gas detection and environmental monitoring.



The Model AC-2 is an instrument for Photoelectron Spectroscopy at atmospheric pressure that is an open counter equipped with an UV source.

The model AC-2 has been developed from proven technology and incorporates the latest in digital control electronics producing an easy to use, flexible system suitable for all levels of expertise.

Continue reading “Photoelectron Spectroscopy Instrument” »



The newly developed AC-3 has been designed by Riken Keiki as a photoelectron spectrophotometer in atmospheric pressure conditions by applying the open counter as an electron detector. The unit has been marketed mainly to the study of organo-electronic materials for organic EL and photocopying.

Continue reading “Photoelectron Spectroscopy Instrument” »


ALMA G2 System

ALMA G2 (Airborne Laser Methane Assessment Generation 2) is the solution for effective and economic pipeline and storage network monitoring and inspection. The ALMA G2 is a cutting edge laser based natural gas detection system that performs inspections at ground level while airborne. Continue reading “Airborne Laser Methane Assessment” »


FP-31 Model

The Portable Formaldehyde Gas Detector Model FP-31 is a precision gas analyser which measures gases in the ppm range using photoelectric photometry method with chlorimetric detection tabs.

Continue reading “Formaldehyde Gas Detector” »



Designed specifically for the tunnel environment, the ILLIOS measures the level of illuminance within the tunnel bore to ensure interior illumination levels are being continuously maintained in order to ensure safe lighting conditions for drivers. Illuminance, or incident lighting, determines the amount of light that covers a specific surface or area within the tunnel.

Continue reading “Tunnel Illuminance Photometer” »

selma sm

SELMA System

When attached to a vehicle, Selma is designed to detect methane gas leaks while still keeping up with traffic.  Utilising infrared detection the unit is able to detect small gas leaks rising from main pipes located under the road surface.

Continue reading “Street Evaluating Laser Methane Assessment” »


Digester Gas Monitor

Gas from waste digesters contains high levels of methane, CO2, and H2S, and little to no oxygen present. The Control Equipment Digester Gas Monitor checks for all these gases on a cyclic basis. A powerful air aspirator pulls a sample from up to 30 metres away. Since digester gas contains high humidity and high H2S, both of which can cause damage to sampling systems, the Digester Gas Monitor is designed to handle these with no damage to the sampling system or sensors. The sample is filtered through a series of dirt, dust, and moisture stopping filters, and these filters are automatically blown back and cleaned out with fresh air at the end of each cycle.
Continue reading “Digester Gas Monitor” »

Contact Control Equipment

Submit an email enquiry or give us a call on 1 800 174 536 and we will answer any questions that you may have.

International Partners

National Phone 1 800 174 536
Control Equipment Pty Ltd
ABN 23 009 838 582

Advertising Agencies Brisbane